Crixler Posted January 24, 2014 Share Posted January 24, 2014 (edited) I don't know if this has been done yet, but I've never come across one. So I just made a vector Mark of Naga, which you can find here: https://www.dropbox.com/s/pursv1wqxvtb6yl/Crixler_MarkOfNaga_000.svgIt's completely accurate, and should be 100% symmetrical, though I may have made some mistake and made it like 99.99% symmetrical instead.So if you've ever wanted to build a pool shaped like a non-pixelated Mark of Naga, or perhaps do something more reasonable, I hope this helps. I'm planning to do a Mark of Grima as well, though I have a bad habit of not finishing things, so who knows. Edit: Mark of Grima is done. Now you can build a Grima pool to go with your Naga pool. It's a weirdly shaped pool, so I wouldn't recommend it. https://www.dropbox.com/s/ua34kdc87rffxux/Crixler_MarkOfGrima_000.svg Edit 2: Made this: https://www.dropbox.com/s/38ysyt1m1mmhzwt/Crixler_FEA_CardCase18_0000.svg It's a custom sleeve thing for the 3DS Card Case 18 that's available from Club Nintendo. It would probably fit Awakening's case, as well, though it may or may not need minor adjustments, as I can't remember for sure if normal 3DS game cases are the same thickness as the Case 18, and don't feel like checking atm.I haven't actually tried printing that out and using it myself yet or anything, as I currently don't have access to a color printer. If anyone uses it, please post a picture so I can see how it looks in real life! Edit 3 because why not: https://www.dropbox.com/s/7q0rri7dh8mazbf/Crixler_FEAZelda_CardCase18_0000.svg Same as the above, but with the Grima side replaced with a Zelda side with the Triforce. Edited January 24, 2014 by Crixler Quote Link to comment Share on other sites More sharing options...
shadowofchaos Posted January 24, 2014 Share Posted January 24, 2014 ...well, this would have been useful a few days earlier. I gave my friend a free lunch for making me a Gimle/Grima mark vector for a locket on Etsy. Quote Link to comment Share on other sites More sharing options...
Crixler Posted January 24, 2014 Author Share Posted January 24, 2014 ...well, this would have been useful a few days earlier. I gave my friend a free lunch for making me a Gimle/Grima mark vector for a locket on Etsy. Oh, good. Your friend's might be better, anyway, as I had to do a lot of my own interpretations on the Mark of Grima, since the reference I was able to fine was kinda smudgy and rather asymmetrical. Quote Link to comment Share on other sites More sharing options...
shadowofchaos Posted January 25, 2014 Share Posted January 25, 2014 (edited) Oh, good. Your friend's might be better, anyway, as I had to do a lot of my own interpretations on the Mark of Grima, since the reference I was able to fine was kinda smudgy and rather asymmetrical. My friend's vector file... I think it's on corel? https://dl.dropboxusercontent.com/u/5490460/FE13%20Scans/grim.cdr The render of it I used: Link version: Click Here Edited January 25, 2014 by shadowofchaos Quote Link to comment Share on other sites More sharing options...
Crixler Posted January 25, 2014 Author Share Posted January 25, 2014 I kinda like the way your friend did the point at the bottom, but tbh, I think mine's actually more accurate and smooth (though I think both bottom points may be equally valid, going from the really smudgy source image we both likely used). Quote Link to comment Share on other sites More sharing options...
AstraLunaSol Posted January 25, 2014 Share Posted January 25, 2014 (edited) I was the one that did that vector, I haven't vectored in a couple months so I'm a bit rusty. I made the mark off of this. It was asymmetrical, which is why I ended up vectoring half and simply flipping and merging the two sides together, so at least the image would be symmetrical. Edited January 25, 2014 by AstraLunaSol Quote Link to comment Share on other sites More sharing options...
Crixler Posted January 25, 2014 Author Share Posted January 25, 2014 Ah, interesting. I've never seen that picture before, is it an official thing, or a fan thing? If your source is official, then yours is actually probably more accurate. I used this, which I'm pretty sure is a scan from Knights of Iris. I didn't mean any offense in claiming mine was better, btw, especially now that I've seen your source image. Quote Link to comment Share on other sites More sharing options...
AstraLunaSol Posted January 25, 2014 Share Posted January 25, 2014 Both of ours have their flaws, mine doesn't have consistent thickness at the very bottom like yours does (but yours seems a bit too thick) but you also have too many crossovers. That ref is from the knights of iris artbook, I can confirm since I have it. But the reference isn't exactly correct since the very bottom point has, well, a pointed tip, unlike the knight of iris ref. http://puu.sh/6x35q.jpg this also kinda helps Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.